MEK 耐磨試驗機 Mek Rub Test Machine

MEK

MEK 耐磨試驗機

Mek Rub Test Machine

廠牌：代理

供應商：大台北尖端儀器有限公司   TEL：02-2531-0981

http://www.tw17.com.tw/product_detail.asp?pro_ser=4841598

磨耗試驗； 代理； 磨耗試驗機；

智慧型手機-行動條碼QR Code MEK摩擦試驗機是一款用來測試彩色鋼板耐丁酮（MEK）溶劑摩擦腐蝕性能的儀器。它的工作原理就是帶有丁酮溶劑的摩擦塊在彩鋼板表面按照預先設置的時間、頻率來回摩擦，摩擦規定的週期之後，通過被摩擦表面的磨損情況來評定彩板耐丁酮腐蝕性。 主要特點： MEK摩擦實驗機是自動化摩擦測試儀，操作安全，完全氣動無需接電，操作員與 MEK試劑接觸機率最低，氣壓穩定。 自動選擇摩擦週期（ 1～999），操作簡單， 因為浪費和被揮發的試劑少，所以所需的 MEK試劑少。 規格: MEK 貯液槽容量 425 cc. 大面積摩擦物體重量 3kg (6.8 lbs) 擊距 203mm (8”) 次數 / 最低限度（雙次摩擦 ） 70 / 分 動力：完全氣動，不需要電，保證安全 操作空氣壓力 550 KPa (80 psi) 最大限度空氣補充壓力 965 KPa (140 psi) 操作壓力下空氣消耗 2.35 SCFM @ 550 KPa (80 psi)，最大不要超過690Kpa 篩檢程式的空氣口連接 ¼ NPT 在控制工作區域，沒有溶劑飛濺傷害 溶劑消耗：25毫升溶劑容量，可支持到600次摩擦 壓力：重量限定模塊，保持壓力一致 鉸鏈摩擦模塊，不影響調換摩擦襯墊或者調換測試樣品 記數器：數字可控制計數，最大 / 最小次數 1-9999 空氣補充 550 kpa (80 psi) 乾淨以及乾燥（沒有冷藏） 前面板安裝空氣壓力和流量控制器 有過濾器和自動下水功能安置過濾裝置 重量: 63 lb. 運輸重量: 105 lb. 尺寸: 18" wide, 19" deep, 19" high 安裝要求:       需要一牢靠堅固且面積足夠大(各一平方米左右)的試驗台和相應的電源插座.MEK摩擦試驗機完全氣動,無需電源,但是需要一壓縮空氣源,使用壓力550Kpa,最大不超過690Kpa.

MEK Rub Test Machine Meets or exceeds: ASTM D 4752, ASTM D 2486; ASTM D 5402; ISO 50230 The MEK Rub Test machine has been developed to combat the problem of inconsistent test results. This semi automated machine gives the line operator and quality control personnel the ability to duplicate results from the laboratory to the production line. Hands off testing, Repeatable test results Intrinsically safe - no electric involved Constant pressure, Dead Weight Rubbing Block Simple operation Metered orifice with auto shutoff to provide consistent flow of MEK Can be easily used for test to failure Hand contact with MEK minimized, solvent added by means of squeeze bottle Controlled Stroke count. Can be set 1 - 9999 strokes Flow Controlled 425cc MEK reservoir capacity Specifications Weight of machine 28.3 kg (62.5 lbs) MEK reservoir capacity 425 cc. Mass of Rubbing Block 3kg (6.8 lbs) Stroke Length 203mm (8”) Number of strokes/min (Double Rub) 70 Operational air pressure 550 KPa (80 psi) Max air supply pressure 965 KPa (140 psi) Air consumption @ operational pressure 2.35 SCFM @ 550 KPa (80 psi) Minimum Flexible air line supply size ¼” I.D. Air inlet connection at filter ¼ NPT Cotton Pad size 1½ x 1¾, 2 ply Counter min/max number of strokes 1-9999 Air supply 550 kpa (80 psi)Clean and dry (non condensing) Dimensions (Width Depth Height) 457x483x483mm (18”x19”x19”) Test panel size 127mm x 305mm (5” x 12”) Electrical Requirements None (all pneumatic system) Panel thickness max** 3.2 mm (1/8”) **thicker panels can be run with a simple adjustment. Available Items Item Number Item AB-410103 MEK Rub Test Machine AB-410131 Variable Stroke Kit - The variable stroke kit allows the user to run non-standard size panels so that a customer can test panels that are shorter in length than what is called for in the standards testing methods. When ordered with the machine as an option will be pre-installed at the factory. The kit can be added to the machine at anytime and only requires a basic amount of tools to retrofit to the machine. AB-410191 MEK-Genie Data Collection Kit - The data collection kit is a add on interface that connects to the machine to allow the operators to collect data pertaining to the tests performed by the machine. This kit can be added to the system at any time and requires no tools to install. The machines are all equipped from the factory with a plug in port that only requires the addition of the software and connector kit. For customers that are already using the DJH Designs Film Build Software System the data collection kit plugs directly into the DJH PCI interface that is included with the DJH View Software. For new customers or customers requiring this to be connected to a different PC they will need to order the PC interface to connect the data kit to the PC. AB-410197 PC interface, USB device

更多TW17!台灣儀器網訊息在
【台灣儀器網】 http://www.tw17.com.tw/
【台灣儀器網APP】 https://play.google.com/store/apps/details?id=tw17.com.tw.app
【TW17!部落格】 http://tw17.blogspot.tw/